Define the equipment and duty
Record shaft or stem diameter, box bore and depth, motion or speed, fluid, temperature, pressure and packing section.
Separate the dimensions and material from the service conditions. An equipment name or a photograph does not establish the sealing construction. If the existing designation is incomplete, identify the unresolved fields in the RFQ.
Relevant product ranges
Compare these products by construction and by the requirements of the selected equipment.
Graphite Packing
Braided flexible graphite packing for pump and valve duties.
- Construction
- Braided flexible graphite; reinforcement specified separately
- Square section
- 3 × 3 mm to 25 × 25 mm for KXT P400 catalog braid
Static-pressure, rotating-pressure and shaft-speed limits are different conditions and must not be combined as one rating.
PTFE Packing
Braided PTFE packing supplied in specified cross sections.
- Product form
- Pure PTFE, lubricated PTFE and PTFE filament grades
- Ordering dimensions
- Packing size
Static-pressure, rotating-pressure and shaft-speed limits are different conditions and must not be combined as one rating.
Aramid Packing
Braided aramid fiber packing.
- Product form
- Aramid braid; PTFE-impregnated and mixed-fiber constructions
- Ordering dimensions
- Equipment
Static-pressure, rotating-pressure and shaft-speed limits are different conditions and must not be combined as one rating.
No products match. Clear your search or send your requirements.
Before you confirm the order
- Check the drawing revision and units.
- Identify the material or selected grade rather than only a generic name.
- State the required dimensions, construction and quantities.
- Define inspection records and acceptance requirements.
- Confirm the named delivery basis and requested date.
Performance values need to refer to the selected grade and operating duty. Pressure, temperature and speed maxima should not be combined into an assumed operating envelope.
Application questions
What information is needed for pump and valve stuffing boxes?
Send shaft or stem diameter, box bore and depth, motion or speed, fluid, temperature, pressure and packing section. Include drawings or existing part references where available.
Can you confirm the material from a photograph?
A photograph can help identify the form, but it does not establish material grade or the original dimensions. Provide the material specification and equipment or process details for review.
Discuss your pump and valve stuffing boxes requirement
Send your product list, drawing revision, materials, dimensions, quantities and delivery destination. Cindy will coordinate the quotation and any questions about the specification.
Send an RFQ ↗